Permalube
This lubrication improves freespool while maintaining protection and durability of moving parts.
Metal Series
With the Metal Series, metal frames keep moving parts in precise alignment for increased efficiency and durability.
Machined Aluminum Frame
These frames are machined from solid aluminum pipestock, which makes them incredibly rigid and strong for ultra tight tolerances
A-RB (Anti-Rust Bearings)
Our specially treated stainless steel ball bearings are at least 10 times more corrosion resistant than standard stainless steel ball bearings.
Forged Aluminum Spool
These spools are made from cold forged aluminum then machined to provide an extremely dense, solid construction that can withstand the heavy drag pressures the reels can apply
Chrome Plated Sideplate Screws
The sideplate screws are chrome plated to prevent corrosion
2-Speed Gearing
Uses 2 sets of gears that are always engaged for quick, easy gear ratio changes even under load
Ratcheting Drag Lever
eliminates the chance of the drag lever backing off due to boat vibration and allows for more precise adjustment
Twin Disk Drag System
uses two drag ddisks and a floating drag plate to effectively double the drag surface which provides a wide range of settings and increased durability (TI16 & TI130A only)
Clicker
The clicker increases the tension on freespool and activates a clicking alarm when a fish bites.
Septon
The handle grip material, Septon, is soft to the touch and does not get slippery when wet (not available on TI12 & TI16).
Offset Ergonomic Power Grip
The power grip is offset on multiple axes to allow natural hand, arm and wrist angles to improve comfort and power (not available on (TI12 & TI16).
Ergonomic Power Handle
Comfortable, non-slip grip provides maximum comfort and torque (TI12 & TI16).
Septon® is a registered trademark of Kuraray Co., Ltd..
Permalube® is registered trademark of Amoco Oil Company, Corporation.
|
Line Retrieve
Per Crank |
Line Capacity |
Max Drag at
Full w/ Freespool |
Max Drag at
Strike w/ Freespool |
A-RB |
High |
Low |
Weight |
Rod |
Model |
(High/Low in.) |
(# Test/Yards) |
(Lbs.) |
(Lbs.) |
Ball Bearings |
Gear Ratio |
Gear Ratio |
(oz.) |
Clamp |
TI12 |
36/16 |
12/880, 16/650, 20/460 |
33 |
23 |
6 |
3.9:1 |
1.7:1 |
34.6 |
Yes |
TI16 |
36/16 |
16/980, 20/670, 30/430 |
29.5 |
22 |
6 |
3.9:1 |
1.7:1 |
37.9 |
Yes |
TI20A |
41/18 |
20/690 |
36 |
30 |
4 |
3.9:1 |
1.7:1 |
49.7 |
Yes |
TI30A |
41/18 |
30/700 |
34 |
25 |
4 |
3.9:1 |
1.7:1 |
52.4 |
Yes |
TI30WLRSA |
41/18 |
50/570 |
34 |
25 |
4 |
3.9:1 |
1.7:1 |
55.6 |
Yes |
TI50A |
37/15 |
50/600 |
37.5 |
28.5 |
4 |
3.1:1 |
1.3:1 |
83.4 |
Yes |
TI50WA |
37/15 |
50/850 |
37.5 |
28.5 |
4 |
3.1:1 |
1.3:1 |
86.3 |
Yes |
TI50WLRSA |
37/15 |
80/550 |
44 |
35 |
4 |
3.1:1 |
1.3:1 |
86.3 |
Yes |
TI80WA |
37/19 |
80/950 |
44 |
35 |
4 |
2.5:1 |
1.3:1 |
115.2 |
Yes |
TI130A |
39/22 |
130/1000 |
99 |
79 |
6 |
2.1:1 |
1.15:1 |
174.1 |
Yes |
TI130A |
39/22 |
130/1000 |
99 |
79 |
6 |
2.1:1 |
1.15:1 |
174.1 |
Yes |
|
|
