. Rubber Handle Grip is comfortable and soft to the touch.
. Adjustable Clicker allows the angler to adjust the amount of freespool tension while.
. Ergonomic Power Handle comfortable, non-slip grip provides maximum comfort and torque.
. Counter Balanced Handle (only on models 12 and 14) by placing a weight on the opposite side of the handle shank from the grip, wobble during the retrieve is eliminated.
. Adjustable Handle Shank (except models 12 and 14) allows the angler to use the handle in the short position for fast retrieves, or the extended position for more cranking power.
. Metal Series Metal frames keep moving parts in precise alignment for increased efficiency and durability
. Forged Aluminum Frame
. Stamped Aluminum Right Sideplate
. Aluminum Left Sideplate
. Aluminum Spool
. Manual Clutch Lever
. Rod Clamp (except model 16)
. A-RB (Anti-Rust Bearings) are specially treated stainless steel ball bearings that are at least 10 times more corrosion resistant than standard stainless steel ball bearings.
. Super Stopper is a one-way roller bearing that eliminates backplay for solid hooksets.
. Assist Stopper is a back-up anti-reverse system that reduces the stress placed on the one-way roller bearing to increase durability.
. High Efficiency Gearing (HEG) is not only the oversized gears, but also includes the setplate and sideplate, which allow for a high speed retrieve while providing unbelievable fish-moving torque.
. Dartainium Drag material provides a wide range of drag setting and the smoothest Shimano drag performance ever.
. Clicking Drag Adjustment reduces the chance of the drag backing off at light settings while providing the angler a reference point to how much drag they add or reduce by turning the star.
Model |
Line Retrieve Per Crank (in.) |
Line Capacity (# Test/Yards) |
Frame Material |
Handle Side Material |
Non-Handle Side Material |
Spool Material |
Gear Ratio |
Weight (oz.) |
Ball Bearings |
Roller Bearings |
Trinidad |
|
|
|
|
|
|
|
|
|
|
TN12 |
36 |
12/300,14/420, 16/220 |
Forged AL |
Stamped AL |
AL |
AL |
6.2:1 |
15.0 |
6 |
1 |
TN14 |
36 |
14/300,16/270, 20/200 |
Forged AL |
Stamped AL |
AL |
AL |
6.2:1 |
15.3 |
6 |
1 |
TN16N |
46 |
14/300, 16/270, 20/200 |
Forged AL |
Stamped AL |
AL |
AL |
6.2:1 |
19.8 |
6 |
1 |
TN16 |
46 |
16/450, 20/320 |
Forged AL |
Stamped AL |
AL |
AL |
6.2:1 |
19.9 |
6 |
1 |
TN20 |
46 |
20/420, 25/300 |
Forged AL |
Stamped AL |
AL |
AL |
6.2:1 |
20.4 |
6 |
1 |
TN30 |
46 |
25/420, 30/350 |
Forged AL |
Stamped AL |
AL |
AL |
6.2:1 |
20.9 |
6 |
1 |
TN40N |
44 |
20/440, 25/330, 30/275, 50/165 |
Forged AL |
Stamped AL |
AL |
AL |
4.9:1 |
28.0 |
6 |
1 |
TN40 |
44 |
30/470, 40/320 |
Forged AL |
Stamped AL |
AL |
AL |
4.9:1 |
29.3 |
6 |
1 |
TN50 |
44 |
40/490, 50/440 |
Forged AL |
Stamped AL |
AL |
AL |
4.9:1 |
30.0 |
6 |
1 |
| Sea Fishing Forum latest topics |
|
|